Connecté en tant que :
filler@godaddy.com
"THE evolution of HAM RADIO"
WOW!!
Our New VE2DX LED Acrylic Dual Zone Call sign Display is GREAT!
Designed so that the callsign (Left 2/3) portion is always on (if you want it!) and a separate PTT input triggers the logo portion of the sign (Right third), this beautiful Canadian-made sign is custom made to your request.
Any proprietary logos must be cleared via a particular legal form.
NEW! Price 60$US including Canada/USA Shipping
DX S&H on req.
AND NOW!!!
We offer simple "ON AIR" signs,
These simple "On Air" sign light up in RED and are transparent when not powered, they run off shack 12VDC power, and can be triggered to turn ON on TX by simply adding a simple dry contact relay controlled by your tranceiver.
ORDER HERE
How do I order?
Well because these are customized, the ordering process is via email.
Simply contact us at ve2dx@hotmail.com with as mutch info as possible;
1- Call sign?
2- Your choice of logo?
3- do you want a flag (Included)
(for DX please include an image of the flag to prevent errors.)
4- If a text below the call sign please include.
5- LED colors Left and Right
6- If a special logo (Not included) please send us examples or sketches.
7- if proprietary logos (not included) we will send you a legal form, please send us examples.
No PAYPAL Account, no worry, on checkout PAYPAL will help you pay with a regular credit card.
How it works
Very simple, the unit is powered via a 12VDC transformer (included), this input always lights up the left 2/3 (Callsign) portion of the unit.
it also has a separate 2 screw input in the rear, this input is used via an external NO contact to apply 12VDC to the right-hand side of the unit (Logo)
How it works
Very simple, the unit is powered via a 12VDC transformer (included), this input always lights up the left 2/3 (Callsign) portion of the unit.
it also has a separate 2 screw input in the rear, this input is used via an external NO contact to apply 12VDC to the right-hand side of the unit (Logo)
How do I get it going?
Very Simple!
Upon reception, open and inspect your unit for any damage.
If there is damage contact us at VE2DX@hotmail.com
Plug your unit into the 12VDC power supply and the Power supply into an outlet.
Your unit should light up both sides.
During manufacturing a jumper is installed in the rear PTT relais input.
Remove the jumper using a small jeweler screwdriver.
the right-hand side should now go off.
To install on the radio, simply locate an isolated PTT NO contact or install a small relay between the radio and PTT onput.
and you are done!
Some techy stuff?
It is 8 3/4 inches by 3 inches display area, the complete sign is 10 inches by 3 3/4 inches.
The base of the acrylic itself is separated into two distinct LED refraction zones to separate the Colors on the display.
The LED circuit is powered by a simple 12VDC Power supply that can be ours or from your shack, it has a simple 2 pins dry contact input to trigger the Right tired side of the display.
Can I get a special LOGO?
YES! for a small fee, we can use almost ANYTHING! :D
just get some good quality images (if possible! :P ) and send them to us.
There is a 15$ fee for special orders and you will need to sign a disclaimer for our designer.
How long does it take?
Well, this is a tough one... :P
Normally, all discussions on designs can take 2 to 3 days.
Once payment is received via PayPal, we get the manufacturing process going.
Manufacturing is 1 to 2 weeks.
Shipping is a good question... it really varies a lot across the DX spectrum.
What about special AC/DC DX power needs?
Well simply, we do not carry all possible power supplies only NA (USA/Canada)
We will send a dc cord with the unit and you will have to supply a 12VDC power source.
Configuration
Pick your Image
You can also send us your own, we will send your disclaimer and extre 15$us fee.
Pick your colors!
You must select your colors for:
the Left 2/3
and the Right 1/3
Available colors are:
Blue
Red
Yellow
Green
White
Photo Gallery
Yaesu/Kenwood with Bluetooth
(The above picture shows twelve YK1-BT production PCBs; these will be separated into twelve single units after production)
Announcing our YK1-BT RS232 DB9 Bluetooth interface.
This stand-alone female DB-9 device plugs into any Standard RS232c male DB-9 connector and automatically makes it available over Bluetooth.
Great for old and new Kenwood, Yaesu, etc... It could even be used in OEM RS232 DB-9 CAT OEM nonradio devices.