Our New VE2DX LED Acrylic Dual Zone Call sign Display is GREAT!
Designed so that the callsign (Left 2/3) portion is always on (if you want it!) and a separate PTT input triggers the logo portion of the sign (Right third), this beautiful Canadian-made sign is custom made to your request.
Any proprietary logos must be cleared via a special legal form.
NEW! Price 60$US including Canada/USA Shipping
DX S&H on req.
Well because these are customized, the ordering process is via email.
Simply contact us at email@example.com with as mutch info as possible;
1- Call sign?
2- Your choice of logo?
3- do you want a flag (Included)
(for DX please include an image of the flag to prevent errors.)
4- If a text below the call sign please include.
5- LED colors Left and Right
6- If a special logo (Not included) please send us examples or sketches.
7- if proprietary logos (not included) we will send you a legal form, please send us examples.
No PAYPAL Account, no worry, on checkout PAYPAL will help you pay with a regular credit card.
Very simple, the unit is powered via a 12VDC transformer (included), this input always lights up the left 2/3 (Callsign) portion of the unit.
it also has a separate 2 screw input in the rear, this input is used via an external NO contact to apply 12VDC to the right-hand side of the unit (Logo)
Upon reception, open and inspect your unit for any damage.
If there is damage contact us at VE2DX@hotmail.com
Plug your unit into the 12VDC power supply and the Power supply into an outlet.
Your unit should light up both sides.
During manufacturing a jumper is installed in the rear PTT relais input.
Remove the jumper using a small jeweler screwdriver.
the right-hand side should now go off.
To install on the radio, simply locate an isolated PTT NO contact or install a small relay between the radio and PTT onput.
and you are done!
It is 8 3/4 inches by 3 inches display area, the complete sign is 10 inches by 3 3/4 inches.
The base of the acrylic itself is separated into two distinct LED refraction zones to separate the Colors on the display.
The LED circuit is powered by a simple 12VDC Power supply that can be ours or from your shack, it has a simple 2 pins dry contact input to trigger the Right tired side of the display.
YES! for a small fee, we can use almost ANYTHING! :D
just get some good quality images (if possible! :P ) and send them to us.
There is a 15$ fee for special orders and you will need to sign a disclaimer for our designer.
Well, this is a tough one... :P
Normally, all discussions on designs can take 2 to 3 days.
Once payment is received via PayPal, we get the manufacturing process going.
Manufacturing is 1 to 2 weeks.
Shipping is a good question... it really varies a lot across the DX spectrum.
Well simply, we do not carry all possible power supplies only NA (USA/Canada)
We will send a dc cord with the unit and you will have to supply a 12VDC power source.
Canada/USA: NEW 60$us Including S&H to Lower 48.
DX: on demand
Need the following;
Full name, address, phone number, and call sign.
Flag or text Above Call Sign: Option
Text Below Call Sign: Option
Select the Left LED Color.
Select the Right LED Color.
Possible colors are Blue, Red, Yellow, Green, and White. Logo: Please select the number in the image.
Font: Please select the number in the image2.
You will be sent a Proof of concept for approval.
(The above picture shows twelve YK1-BT production PCBs; these will be separated into twelve single units after production)
Announcing our YK1-BT RS232 DB9 Bluetooth interface.
This stand-alone female DB-9 device plugs into any Standard RS232c male DB-9 connector and automatically makes it available over Bluetooth.
Great for old and new Kenwood, Yaesu, etc... It could even be used in OEM RS232 DB-9 CAT OEM nonradio devices.